Mauldin Machine Inc., 9107 Warden Road, North Little Rock,

Drills

American - 4' X 11" "Hole Wizard" Radial Arm Drill, 60 to 3000 RPM, 12" Spindle Travel, No. 4 Morse Taper, 5 HP, Box Table, New in 1960's, Stock # 2350  

American - 6' X 17" Column, Hole Wizard Plain Radial Drill, w/12" Extra Column, Serial Number 71013-45, Power Elevation on Arm, Power Clamping, Power Feed of Head on Arm, Box Table, Coolant, Two Speed Motor for extra slow RPM's, Stock # 2247 

Cincinnati Bickford - 4' x 9" Radial Arm Drill, New in 1956, No. 4 Morse Taper, 125 to 2500 RPM Box Table and Coolant, Stock #2218  

Rockwell - Model 15 Drill Press, Floor Model, 1/2 HP Drill Chuck, Stock# 2140   

Veet - 3 ' x 7" Column Radial Arm Drill, Model 3H, 75 - 1000 RPM, #4 Morse Taper, 2 HP, 30" x 48" Work Area, Power Downfeed, Power Elevation, With Factory Stand, Stock #2130   

Drills - Production Type with Indexing Table

Barnes - Production Type Box Column Drill, 18" x 28" Table, Auto Down Feed, 10 HP, W/Wisconsin Drill Head, Stock 2242    

Burgmaster - Model 1B Turret Drilling Machine,6 Position Turret, 275 to 4010 RPM, Manual Feed and Auto Index, 1./.5 HP, 4 each Drill Chucks and 2 each Tap Heads, Runs Great, In Plant, Stock # 2299  

Burgmaster/Houdaille - 2B Turret Drilling Machine, 6-Position Turret, 3/4" Capacity, 3 Drill Chuck, 3 Tapping Heads, New in 1977, Stock # 2376  

Delta - Gang Drill, 5 Heads on a 6 Head Table, Drill Units are Delta 20" Cat# 20-400, Step Pulley drives, No. 3 Morse Tapers, in Need of Minor Repair and Clean Up   

Natco - H6 Multiple Spindle Production Type Drill, 15 Spindles, 3/4" Drives, 17" X 28" Table, 206 to 2735 RPM, 5 HP, Stock 2300 

Natco - F6B 8-Spindle Multiple Spindle Drill, 3 1/2" Uppers, 2" Drilling Capacity, 30 HP, Shuttle Table, New in 1976, As Taken From Service, FOB Alabama, Stock #0261 

Natco - G434 8-Spindle Multiple Spindle Drill, 3 1/2" Uppers, 2" Drilling Capacity, 30 HP, Shuttle Table, New in 1979, As Taken From Service, FOB Alabama, Stock #0320 

Rockwell/Delta - Gang Drill, Six 20" Step Pulley Drive Drill Units Mounted on a 24" X 125" Table, 180-2000 RPM, No. 3 Morse Tapers, Two Heads with Power Feed, In need of minor repair and clean-up