Mauldin Machine Inc., 9107 Warden Road, North Little Rock,

Presses

Forging 

Lake Erie - 4500 Ton Hydraulic Down Acting Forging Press, Very Good Condition, Well Maintained and Updated , Stock # 2440

National Maxipress - 3000 Ton Mechanical Forging Press, 53" X 57" Bed, 16" Stroke, In Plant and Running, Stock # 2439

Lake Erie - 3500 Ton Hydraulic Down Acting Forging Press, , Main Ram Diameter-57", Very Good Condition, Press has been well maintained and updated, Stock # 2417

Ajax- 3500 Ton Hot Forging Press, Stroke 15", Shut Height 41 3/4", Stock # 2402

TMP - 1000 Ton Mechanical Hot Forging Press, Model KB8040, Condition Very Good, Stock #2359 

Ajax - 2000 Ton Mechanical Forging Press, Stroke 12", Shut Height 30.9", bed area 42" X 42", In Plant, Stock 2318   

Dynapak- 2000 Ton Forging Press, Hydraulic, Model 1220B, Serial # PEF 510V, Stock 2061 

Ajax - 2500 Ton Mechanical Forging Press, Stroke 12", Shut Height 29.8", Bed Area 42" X 42", Almost a Complete Rebuild Shortly Before Being Taken out of service, In Plant, Stock 2319  

Hydraulic

Clearing - 3000 Ton Down Acting 4 Post Hydraulic Press, Model H-3000-216-172, Equipped with 800 Ton Cushion, Rare, Difficult to Find, Large Bed, Stock # 2441

Loewy - 6500 Ton Hydropress, 6500 Ton Press Tonnage-Main Ram, 34" Stroke, 750 Total Horsepower, Condition-Very Good, Inspect in Plant, Under Power, Updated PLC Press Controls in 1990's, Stock #2435

HPM - 7000 Ton Hydraulic Press, 48" X 118" Bed, 28" Stroke, 28" Daylight. Last Used as a Rubber Pad Press in Aerospace Plant, Stock # 2438

Clearing  - Model HG-10-20, Open Gap Hydraulic Press, 10 Ton Capacity, 8 Ton Stripping Force, 7 1/2 H.P. Motor, Stock #2191  

Dake  - 25 Ton H-Frame Shop Press (Hand), Stock #2058  

Denison - 8 Ton Multipress, 12" Stroke, 10" Throat, 18" Daylight, new in 1960's, On Large Stand, Stock # 2057   

Denison - 75 Ton Triple Action Hydraulic Sizing Press, Stroke 15” main ram, 20” x 34” Bed, Core Rod and Ejector Cylinders, 30” Daylight, PLC Control, New in 1998, In Plant, Stock # 2324  

Eemco - 804 Ton Hydraulic Housing Type Press, Upmoving 40" X 40" Bed, 18" Stroke, 35" Daylight, PLC Control, Stock # 2266 

Enerpac - 25 Ton c-Frame Type Hydraulic Production Press   

Hartup - 80 Ton Stamping Trimmer Press, Model 2C-1/4-15, 15" Stroke, new in 1969, Stock #2059   

Mitchell - 120 ton Hydraulic Compression Molding Press, 7' X 11' Bed, 78" Stroke, Disassembled and in Storage, Stock # 2219

P.H.I. - 75 Ton Heated Platen Hydraulic Compression Press, Platen Size 24" X 24", 12" Daylight, 600 Degree F Maximum Temperature, Double Action, New '79, Nice Press, Stock # 2328  

Mechanical:

Bliss - 4000 Ton Mechanical Knuckle Joint Press, 12" Stroke, 42" Shut Height, 72" X 60" Bed, New in 1950's, Disassembled and Ready for Loading, Stock # 2437

Bliss - 75 Ton High Speed Press, Model HP2-75, 3/4" Stroke, 36" X 30" Bed, 0 to 325 SPM, New 1968, Stock # 2385

Brown Boggs - 40 Ton OBI Press, 1 1/2" Stroke, Variable Speed, 100 to 400 SPM, 8.5" Shut Height, 28" X 18.5" Bed, Load Analyzer, New in 1980's, Nice Press, Stock # 2302   

L & J Press - 27 Ton O.B.I.,  Model 3 1/2 - 3" Stroke, 8 1/2" Shut Height, 27 1/2" X 13" Bed, Air Clutch and Brake, Dual Palm Control, New in 1978, Stock # 2234 

L & J Press - 36 Ton O.B.I.,  Model No. 36,  3" Stroke, 9" Shut Height, 26" X 15" Bed, Air Clutch and Brake, Updated Control, New in 1974, Stock # 2374

Rouselle - Model G1-32-8, 2" Stroke, 18 1/2" Shut Height, 24" X 15" Bed Area, 70 SPM, Air Clutch and Brake, PLC Controller, Pendant Control, New in 1995, Stock #2259  

Powder Compacting:

Alpha - 750 Ton, Model 750D, new in 1970, In Plant, Stock # 2398

Cincinnati - 2,000 Ton Hydraulic Compacting Press, Model 2000-C-7 Rigid Reflex, 7" Fill, New 1974, Large, Unusual Press in Good Condition, In Plant, Stock # 2294 

Simac Densomatic - Isostatic Powder Compacting Press, 6 Station, 20 Ton Capacity Hopper, Conveyor (3 Available), Stock # 2290